|
Boat Industry
Foam
Flotation Foam
design for the Boat industry!
A grate choice for Boats, Marinas, Patios, Pools, Seat
Pads, Yards
* Isolation : Steel from Masonry * Metal from metal (curtain
walls ect.)
* Closed Cell Expanded Polyvinyl
Chloride, Good Tensile
* Good Chemical Resistance & Temperature serviceability |
 |
Full Sheet: 60" x 96" x 1-1/2" | $105.85 | Half Sheet: 30" x 96" x 1-1/2" Thick | $ 58.85 | Quarter Sheet: 30" x 48" x 1-1/2" Thick | $ 29.85 | Full Sheet: 60" x 96" x 1" Thick | $ 69.85 | Half Sheet: 30" x 96" x 1" Thick | $ 58.85 | Quarter Sheet: 30" x 96" x 1" Thick | $ 21.85 |
Flotation
FoamShipping Weight: .375lb.-
Per 1" x 12" x 12" |
Property |
Test Method |
Typical
Values |
Density |
ASTM D- 1667 |
3.5 p.c.f |
Compression
Deflection 25% |
ASTM D- 1056 |
1.5 - 3.0 psi |
Comp. Set
25% |
ASTM D- 1056 |
24% max |
Comp. Set
50%
(sample size 1" x 2" x 2") |
ASTM D- 1056
(ASTM D- 1667) |
50% max
(15% max*) |
Tensile |
ASTM D- 412 |
40 min. |
Elongation |
ASTM D- 412 |
100% min |
Water Absorption |
ASTM D- 1056 |
10% max wt. |
Heat Aging |
ASTM D- 1056
(22 hrs. @ 158 F) |
+/-30% |
Thermal
Stability |
ASTM D- 548
(% change in length after 7 days @ 220F) |
7% max wt. |
Ozone Resistance |
ASTM D- 1171 |
Pass |
Temperature
(Lower limit to upper limit) |
|
-40F to 220F |
Only Available in Full
Sheets
To secure the sealing of joints and seams, this glue adhesive
backing is strong and is suitable for formica and can stick
on rubber, glass, leather, wood, spong, plastic, paper, cement
and fabric, and other surfaces. Just cut to size and peel off
the backing, it is that easy! If you would like a sample please
call or e-mail us.
Flotation With Adhesive Glue is
available for $28.00 extra
(Sheets Only)
| Choose Size
|
|
|
|